• Woodwork inspection
• Metalwork inspection
• Beam units inspection – remove covers & wires are checked
• Wall bars inspection (also checking wheels)
• Rope tracks inspection (ropes also inspected)
• Basketball inspection
• Mats inspection – checking for cuts/splits
• Vaulting equipment inspection
• All portable equipment inspection
• Report – A full report produced and Health & Safety certificate is issued once remedial work has been completed

• Woodwork inspection
• Metalwork inspection
• Beam units inspection – remove covers & wires are checked
• Wall bars inspection (also checking wheels)
• Rope tracks inspection (ropes also inspected)
• Basketball inspection
• Mats inspection – checking for cuts/splits
• Vaulting equipment inspection
• All portable equipment inspection
• Report – A full report produced and Health & Safety certificate issued once remedial work has been completed

• Cricket netting inspection (Also checking trolleys)
• Division netting Inspection (also checking the trolleys)
• Basketball Inspection
• Floor sockets – Cleaned where possible
• Games posts – Checking the welds of post
• Storage – Tighten brackets & replace screws where possible
• All Portable Equipment Inspection
• Report – A full report produced and Health & Safety certificate issued once remedial work has been completed

• Trampoline Legs – Inspecting the welds & checking the collars
• Side rails inspected
• End rails – Checking angles & welds
• Roller stands – Inspecting the hooks
• Leg braces – Checking the fittings
• Trampoline Bed – Inspecting the anchor bars & webbing
• Coverall pads – Checking the ties, condition of pads & correct fittings
• Trampoline Springs/Cables – Inspecting cables and springs for wear
• Trampoline Adjusters/Chains – Inspection of the chains
• Report – A full report produced and Health & Safety certificate is issued once remedial work has been completed

• Life guard chairs (Fixed and Portable) – Checking the welds & floor rubbers
• Starting blocks – Checking the anti slip, securing bolts & welds
• Lane marker ropes and floats – Checking & adjusting wires & checking the floats
• Anti-wave racing lanes and floats – Checking & adjusting wires & checking the floats
• Storage reels for lane markers – Checking the welds
• Aqua Board Inspection – Checking fixings and straps are secure
• Immobilisation stretchers check headrests
• Turning boards / Brackets – Checking the boards
• Rescue buoys – Check for damage & check the ropes
• Training and reach poles – Checking the handgrips
• Poolside floor sockets – Clean floor sockets & check threads
• Equipment trolleys – Checking the welds
• Wall storage inspection – Checking the rubbers
• Report – A full report produced and Health & Safety certificate issued once remedial work has been completed

• Equipment Frame – Check welds, tighten fixings and lubricate
• Guide Rods – Degrease and lubricate rods
• Machine Wires/Belts – Check for wear, adjust and lubricate
• Equipment Upholstery – Check for wear, tighten fixings
• Machine Plungers – Check operation and adjust the springs if needed
• Machine Rubbers – Inspect and recommend if missing or worn
• Weight stacks – Adjust check for damage or wear
• Pulleys – Check bearings, tighten & lubricate
• Handles/clips – Check for wear & operation
• Selector keys – Checking for wear
• General Clean of the machine & adviced on general condition

• Equipment covers inspected – We remove the covers & vacuum circuit boards
• Belts/Chains – Check, lubricate, adjust tensions, and check worn links
• Equipment bearings are checked for wear
• Display check of machine operation
• Hinge points – Lubricate
• Belts – Silicon sprays if required, check decks for wear and reverse if required
• General cleaning of the machine & inspection of all parts

Trampoline modules

• Inspect under frames for secure fixings to the floor on all uprights.
• The engineer checks all welds on frames.
• Checking that tube ends have tube inserts.
• Checking that frames are secured to each other with no protruding bolts.
• All nuts are nyloc nuts are checked.
• Checking for combustible or bio hazard waste under frames.
• The underside of springs and anchor bars are checked.
• Integrity and securing of frame pads to frames is checked.
• The engineer checks for gaps in the pads.
• We check the integrity of mesh bed, ensuring there is no access to springs from users’ feet.
• We check the integrity of metal anchor bars on frames and beds.
• Check all welds on the upper side of frames.

Padded columns

• Check all columns within the trampoline park have padding on them to a height of 2.5m
• Check all post padding is secured to posts with no metal exposed.

Padded columns

• We check all pads on vertical and horizontal seating area are secure.
• Check integrity of padded seating for tears, rips and holes. The padded seating is checked for exposed fixings.

Padded seating

• Engineer checks all pads on vertical and horizontal seating area are secure.
• The integrity of padded seating is checked for tears, rips and holes. Padded seating is checked for exposed fixings.

Enclosure

• We check that all horizontal, and metal posts are secure, and not bent or damaged.
• Check all horizontal and vertical post padding is secure with no exposed metal.
• A check that the padding is secure with either cable ties or whipped round with twine.
• Cable ties are checked to have no sharp edges if used.
• Checking all netting is intact with no holes, rips or tears to netting.
• All netting is checked to make sure it has been firmly secured to horizontal and vertical posts using whipped in twine.

Basketball boards

• The Framework is checked and made sure it is intact with no cracked welds and firmly secured to enclosure posts.
• Check backboard is intact with no cracks or damage.
• A check that all backboard and ring fixings are in place and secure.
• Check ring is intact, no failed welds or bent.
• Check basketball net is in place and secured to the frame.

Ancillary items

• We check the framework and surface of stairs, doorways, and access paths around and within the trampoline park.